Author |
Topic: MIDI MAPPING TRANSLATION HELP NEEDED (Read 1248 times) |
|
mcinnes01
New Member
MIDI-OX Rules!
Gender: 
Posts: 6
|
 |
MIDI MAPPING TRANSLATION HELP NEEDED
« on: Sep 5th, 2009, 12:01pm » |
 Quote  Modify
|
Hi,
I am trying to map my korg kaos pad 1 so I can use the X/Y to control effects in ableton. I've managed it so far in that I can control ableton with it but with one fundemental problem...
The kaoss pads X- axis outputs pitch bend from - 8192 to + 8192
But the Y - axis outputs from the bottom of the y axis to the middle bredth 127 to 0
Then from the middle of the Y - axis to the top modulation 0 to 127.
I basically need to translate the X- axis pitch bend -8192 to +8192 translated to CC 0 to 127
And the Y-axis bredth 127 to 0 and modulation 0 to 127 in to one single output of CC 0 to 127.
Currently the way I have mapped it means that the X works fine but when you go past the middle of the Y -axis it recirculates through ie scroll top to bottom you get down movement to the bottom but then when you cross the middle of the Y - axis it starts to go back up to the top.
Any ideas
Thanks in advance
ANDY
|
| « Last Edit: Sep 6th, 2009, 9:21am by mcinnes01 » |
 IP Logged |
|
|
|
babotas
Member
MIDI-OX Rules!
Posts: 44
|
|
Re: MIDI MAPPING TRANSLATION HELP NEEDED
« Reply #1 on: Sep 9th, 2009, 3:37pm » |
Quote Modify
|
Hi mcinnes01,
In case you haven't tried, a suggestion is that you watch the MIDI-data being output by what you are trying to change.
You see the controllerNumber that relates to the physical device, and the data it sends as you move the device.
Then, I'd write those down, study them, and when they make sense, usually inspiration strikes.
Sometimes the Devil gets in the way of inspiration, though.
Or good help from Jamie hopefully is on its way. 
|
|
IP Logged |
|
|
|
|
User Forum ::
Powered by YaBB
Home 
Help 
Search 
Members 
Login 
Register
Reply
Notify of replies
Send Topic
Print