Author |
Topic: APC 40 AND Resolume (Read 10118 times) |
|
Breath
Administrator
Gender: 
Posts: 1030
|
 |
Re: APC 40 AND Resolume
« Reply #1 on: Mar 11th, 2013, 8:34pm » |
 Quote  Modify
|
I'm afraid the link doesn't work for me.
Perhaps a file permission thing.
Sorry
Royce
|
|
 IP Logged |
|
|
|
Breath
Administrator
Gender:
Posts: 1030
|
|
Re: APC 40 AND Resolume
« Reply #3 on: Mar 13th, 2013, 10:57pm » |
Quote Modify
|
Ok I think I know what you want.
Download and install MidiYoke (from MidiOx site)
Midi Yoke is like an internal Midi interface, so we can have
APC Midi Interface IN->MidiOx->MidiYoke Out->->MidiYoke In-> Program
Track Select 1 to 8 is putting out a CC message and you want to change it to a note value.
You don't mention what the CC number or values the switch is putting out so I will give you an example so you can modify it to suit.
MidiOx Menu 'Option/Data Mapping'
Clear button
Insert button this inserts a line. You will need 9 one for each button
When Input matches...
Channel = 9
Event Type = Ctrl
Ctrl# Min = controller number, say 1 for button 1
Ctrl# Max = same controller number
Amount Min and Max = -1 that is, any value
Set Output To
Channel = whatever Note channel you need
Event Type = Note On
Note# Max = Min = D#2 there is some dispute about the octave but it should be 27 or 39
Velocity Max = Min = -1 so the velocity is taken from the CC Value
Insert a new line for each button, changing the CC number (Ctrl#) and the note number.
Save - my filename is 'APC_CCtoNote.mox'
Bring up the Midi Port Routing in MidiOx
Drag a connection from the APC Midi in port to MidiYoke1 Out
Click on the small square in the middle of the connect line
Select your newly created map file APC_CCtoNote.mox
Start your music program and select MidiYoke1 as your input as if the APC was plugged into it.
You should be good to go.
All the best
Royce
|
|
IP Logged |
|
|
|
|
User Forum ::
Powered by YaBB
Home 
Help 
Search 
Members 
Login 
Register
Reply
Notify of replies
Send Topic
Print
)