swayzak
Member
MIDI-OX Rules!
Posts: 71
|
 |
Weird problems with MidiOX and FLS 5....
« on: Mar 6th, 2005, 6:49pm » |
 Quote  Modify
|
I have a complicated setup.
Basically I have a Yamaha sw1000 with plugstation + 4 daughter plg boards.
I also have an rme hdsp 9652 as main audio card (with 2 midi ins/outs).
2 keyboards + Kenton Control Freak are combined into Yoke 1 (from 2 hdsp midi ports and sw1000 midi port).
The sw1000 midi out goes to the plugstation, so to make this multiclient I have Yoke 4--->sw1000 midi out. Therefore several applications can address the plugstation at once.
In FLS I have setup 3 virtual midiout ports to access the sw1000 and plugstation (Port 2 = sw1000 synth 1, port 3 = sw1000 synth 2, port 4 = yoke 4 (plugstation).
I have then created a large number of Midi Out generators to output to sw1000 synths and plugstation, each set to appropriate midi channel + FLS port
e.g.
PLG DX = midi channel 1 (slot 1 plugstation), FLS port 4
PLG PF = midi channel 2 (slot 2 plugstation), FLS port 4
etc.
sw1000 synth 1 = midi channels 5-16 on FLS port 2
sw1000 synth 2 = midi channels 5-16 on FLS port 3
I have painstakingly "midi learnt" the yamaha CC controllers for corresponding controller knobs in the FLS Midi generator gui
e.g CC7 volume etc.
The knobs respond to remote control and the parameter changes accordingly but I seem to get "leakage" of the messages into Yoke 4 inputs 1 to 4 (mainly just one input flashes but sometimes others flicker as well).
At the same time all 4 of the midi output channels from Yoke 4 send the messages therefore all 4 plg cards receive data.
This clearly makes remote control of the plugstation impossible as all cards seem to respond no matter what channel (pattern) is selected in FLS.
It even happens when a completely different FLS output port is used
e.g. when remote controlling a parameter of the sw1000 - this means that although the Midi Out generator is set to output on midi channel 8 and port 3, messages are still getting out to yoke 4 and to all 4 plg cards.
I've tried to follow the signal path here but can't locate the culprit.
Can you advise ?
cheers
swayzak
|
User Forum ::
Powered by YaBB
Home 
Help 
Search 
Members 
Login 
Register
Reply
Notify of replies
Send Topic
Print
Author
IP Logged