User Forum    :: Powered by YaBB
  « MIDI-OX User Forum - Midi-ox »		 Welcome, Guest. Please Login or Register.
May 2nd, 2025, 7:12pm

Home Home Help Help Search Search Members Members Login Login Register Register


   MIDI-OX User Forum
   MIDI-OX
   Questions and Discussion (Moderator: Jamie OConnell)
   Midi-ox		 « Previous topic | Next topic »
Pages: 1  Reply Reply Notify of replies Notify of replies Send Topic Send Topic Print Print
   Author  Topic: Midi-ox  (Read 1323 times)
Pissadou
New Member
*



MIDI-OX Rules!

   


Posts: 1
Midi-ox
« on: Feb 28th, 2023, 7:29am »		 Quote Quote Modify Modify
I use Vanbasco to play midi sequences.
Vanbasco is configured as an output port on my UA-25 interface.
Why do I see no activity of the notes sent to my synth
 (this one reproduces the sequence well) on the output screen
 of Midi-ox ?
IP Logged
Breath
Administrator
*****





   
WWW

Gender: male
 Posts: 1029
Re: Midi-ox
« Reply #1 on: Feb 28th, 2023, 5:48pm »		 Quote Quote Modify Modify
Vanbasco is an application that outputs Midi and MidiOx reads what MIDI is coming in to the PC.
 
So to see what Vanbasco is doing either...
 
Connect with a cable the Midi Out Port connected to Vanbasco on your Midi interface (the cable you sound module is normally connected to) to a Midi In on a Midi interface that is displayed in MidiOx (to set this up goto Options / Midi Devices)  
Playing Vanbasco, you should see the Midi data displayed in the Midi Input window in MidiOx.
 
or
 
Install Midi Yoke or loopMidi (free from the web - there are others).
They are Midi drivers but don't connect to external hardware.
You can think of them as software Midi Cables
 
So if you install loopMidi...
1) On Vanbasco make the Midi output port loopMidi
2) In MidiOx go to Options / Midi Devices and select loopMidi input and loopMidi Output (both ends of the software cable)
3) Play Vanbasco and you should see data coming in to the Midi Input window from the loopMidi port.
 
Vanbasco (in  PC) ->loopMidi -----> MidiOx
 
To play a synth and watch the data....  
 Goto the MIDI Port Routing window in MiidiOx and drag the loopMidi Input (left side) to the Midi Out connected to your sound module (on the right side)
 
Vanbasco (in  PC) ->loopMidi ----> MidiOx ---> Synth
 
Hope this helps.  
Post again if you have any more questions
 
All the best
Royce
IP Logged
Pages: 1  Reply Reply Notify of replies Notify of replies Send Topic Send Topic Print Print

« Previous topic | Next topic »


MIDI-OX User Forum » Powered by YaBB 1 Gold - SP 1.3.1!
YaBB © 2000-2003. All Rights Reserved.