MIDI-OX User Forum - Print Page


    
      
        MIDI-OX User Forum
        (http://www.midiox.com/cgi-bin/yabb/YaBB.pl)
      

        MIDI-OX >> Mapping Questions >> AN1XEDIT WITH CUBASE
        
(Message started by: DMANX on Sep 16^th, 2003, 4:21pm)

Title: AN1XEDIT WITH CUBASE
Post by DMANX on Sep 16^th, 2003, 4:21pm

Hi,

I have part of my set up working now in midi.

The problem I am having is that my AN1X synth will not receive data from an1xedit, I can only use the on board presets on AN1X. (Local midi is set to ON)

If I click on the virtual keyboard of an1xedit all I get is piano sounds and not the selected synth voices.

I am not sure what the device parameters etc should be on an1x edit, as I am not using the AN plugin card.

Here is my set up as follows:

MIDI- SETUP

PC

SW1000XG /DX150PLG PLUGIN CARD …..SET TO MIDI CH1,

SOFTWARE: MIDI-OX, AN1XEDIT, EGEDIT, DX SIMULATOR, CUBASE 5.1, WIN XP PRO

HARDWARE SYNTHS

AN1X …..SET TO MIDI CH2

KORG MS2000R = (RACK SYNTH 1) ……SET TO MIDI CH3

NOVATION SUPER NOVA MK2 RACK = (RACK SYNTH2 2)……SET TO MIDI CH4

MIDI CABLE SETUP

AN1X MIDI OUT TO SW1000XG MIDI IN

SW1000XG MIDI OUT TO AN1X MIDI IN

AN1X MIDI THRU TO RACK SYNTH 1 MIDI IN

RACK SYNTH 1 MIDI THRU TO RACK SYNTH 2 MIDI IN

XGEDIT

MIDI INPUT=NONE

MIDI OUTPUT A=SW1000 SYNTH2

MIDI OUPUT B=MIDI-YOKE NT 1

DX SIMULATOR

MIDI IN=NONE

MIDI OUT=MIDI YOKE NT1

BOARD No.1

DEVICE=1

PART=1

AN1XEDIT (AN1X MODE)

MIDI INPUT=NONE

MIDI OUTPUT=MIDI-YOKE NT2

MIDI THRU=UNTICKED

MIDI-OX

MIDI INPUT=MIDI YOKE NT1 & 2, PORT MAP – SW1000SYNTH1

MIDI OUTPUT= SW10000SYNTH 1 & 2, MIDI YOKE NT1 – 8, SW1000 MIDI OUT

PORT MAP- MIDI YOKE NT1 & 2.

CUBASE MME SETUP

MIDI INPUT=SW1000 MIDI IN

MIDI-YOKE 1

MIDI OUTPUT=SW1000 SYNTH1

SW1000 SYNTH 2

SW1000 MIDI OUT

CUBASE OPTIONS-MIDI FILTER

SYSEX THRU=TICKED

SYSEX REC=UN TICKED

CUBASE OPTIONS

PLAY IN BACKGROUND=TICKED

CUBASE OPTIONS MIDI SETUP SYSTEM

INPUT FROM=SW1000 MIDI IN (TICKED)

=MROS (TICKED)

Please can you very kindly advise me on this problem.

Regards
DMANX

Title: Re: AN1XEDIT WITH CUBASE
Post by Jamie OConnell on Sep 18^th, 2003, 1:40am

Let's keep this discussion to one thread. The one in Questions and Answers already has a response so I'm closing this one.