MIDI-OX User Forum - Print Page


    
      
        MIDI-OX User Forum
        (http://www.midiox.com/cgi-bin/yabb/YaBB.pl)
      

        MIDI-OX >> Mapping Questions >> E-MU XMIDI 1x1
        
(Message started by: psymon on May 5^th, 2008, 4:22pm)

Title: E-MU XMIDI 1x1
Post by psymon on May 5^th, 2008, 4:22pm

Hi Everyone!
I'm new to MIDI-OX and I wonder if it could solve my problem.
I want to use ReBirth on a laptop and connect it with my KORG Electribe EM-1 groovebox and my E-MU XBoard. The EM-1 should send MIDI clock and the XBoard should controll both the EM-1 and ReBirth on different chanels. I'm using an E-MU XMIDI 1x1 interface that has 1 MIDI In & 1 MIDI Out cable and a USB. If I connect the input of the cable to the out of the EM-1 the programe syncs perfectly with the EM-1 after some adjustments but then I can't controll ReBirth with the XBoard (its out is connected to the EM-1's in). If I connect the out of the interface to the thru of the EM-1 then I get controll over ReBirth and the EM-1 as well but loose MIDI sync.
If you have any ide how to solve this, please help me! THX!!