MIDI-OX User Forum - Print Page


    
      
        MIDI-OX User Forum
        (http://www.midiox.com/cgi-bin/yabb/YaBB.pl)
      

        MIDI-OX >> Mapping Questions >> HOW CAN I MAP MODULATION AND BREADTH AS CC?
        
(Message started by: mcinnes01 on Oct 4^th, 2009, 9:19am)

Title: HOW CAN I MAP MODULATION AND BREADTH AS CC?
Post by mcinnes01 on Oct 4^th, 2009, 9:19am

I HAVE A KORG KAOSS PAD KP1 AND I AM TRYING TO USE IT AS A MIDI CONTROLLER. BASICALLY FOR THOSE WHO DON'T KNOW IT HAS A TOUCH SENSITIVE X-Y PAD.

ON THE X AXIS PITCH BEND IS BEING OUTPUT SO NO PROBLEMS WITH MAPPING THAT AS A CONTRROL CHANGE

ON THE Y AXIS THE BOTTOM TO THE MIDDLE OF THE PAD OUTPUTS BREADTH WITH A MIN VALUE 127 AND MAX VALUE 0, THEN FROM THE MIDDLE OF THE Y AXIS TO THE TOP IT OUTPUTS MODULATION WITH A MIN VALUE OF 0 AND MAX VALUE OF 127.

BASICALLY I NEED TO BE ABLE TO USE THIS AS ONE AXIS WITH A CONTROL CHANGE OF 0 TO 127. SO TO DO THIS I NEED TO TRANSLATE BREADTH FROM MIN 127 MAX 0 TO CC MIN 0 MAX 63 AND THEN MODULATION FROM MIN 0 MAX 127 TO CC MIN 64 MAX 127.

I CANT SEEM TO FIND A WAY OF SPECIFYING MODULATION OR BREADTH AS THE TYPE OF INPUT IN ORDER TO TRANSLATE IT TO A NORMAL CC VALUE, SO I CAN HAVE IT RUNNING AS ONE OUTPUT INSTEAD OF 2 SEPERATE ONES.

I GREATLY APPRECIATE ANY IDEAS YOU MAY HAVE.

ANDY

Title: Re: HOW CAN I MAP MODULATION AND BREADTH AS CC?
Post by mcinnes01 on Oct 4^th, 2009, 10:36am

done it i found the numerical values for breath and modn so i could map them to a single cc value

Title: Re: HOW CAN I MAP MODULATION AND BREADTH AS CC?
Post by Chi7d on Mar 8^th, 2010, 1:49am

if you're still at it ...

how can i convert breath input from my wind controller to volume (cc2 to cc7 right ?)

can you be kind and post a print screen of how to do it ... i've tried it but just can't figue it out !!

help me please!
radu