MIDI-OX User Forum - Print Page


    
      
        MIDI-OX User Forum
        (http://www.midiox.com/cgi-bin/yabb/YaBB.pl)
      

        MIDI-OX >> Mapping Questions >> APC 40 AND Resolume
        
(Message started by: lidoric on Mar 10^th, 2013, 10:29am)

Title: APC 40 AND Resolume
Post by lidoric on Mar 10^th, 2013, 10:29am

apc 40 mapping: (image link)
http://images.search.conduit.com/ImagePreview/?q=apc+40+altrnate+ableton+mode&ctid=CT3220468&SearchSource=15&FollowOn=true&PageSource=Results&SSPV=&CUI=UN20451637916266918&UP=&UM=UM_ID&start=0&pos=34

When i click on F2 (for exemple) , in resolume (midi map edit) i get F2 ! GOOD

my problem:
when i click on "track selection" ( button 1-8 ) i get CC (1-127) , how i can get note ? D#2

* if i dont use with midi-ox , and connect only apc-40 to resolume all work fine .

answer? :))

Title: Re: APC 40 AND Resolume
Post by Breath on Mar 11^th, 2013, 8:34pm

I'm afraid the link doesn't work for me.
Perhaps a file permission thing.

Sorry

Royce

Title: Re: APC 40 AND Resolume
Post by lidoric on Mar 13^th, 2013, 11:31am

http://thymenlost.com/wp-content/uploads/2010/08/Akai-APC40-mapping-version2-not-NL.jpg

try this , thank you! :)

Title: Re: APC 40 AND Resolume
Post by Breath on Mar 13^th, 2013, 10:57pm

Ok I think I know what you want.

Download and install MidiYoke (from MidiOx site)
Midi Yoke is like an internal Midi interface, so we can have
APC Midi Interface IN->MidiOx->MidiYoke Out->->MidiYoke In-> Program

Track Select 1 to 8 is putting out a CC message and you want to change it to a note value.
You don't mention what the CC number or values the switch is putting out so I will give you an example so you can modify it to suit.

MidiOx Menu 'Option/Data Mapping'
Clear button
Insert button this inserts a line. You will need 9 one for each button

When Input matches...
Channel = 9
Event Type = Ctrl
Ctrl# Min = controller number, say 1 for button 1
Ctrl# Max = same controller number
Amount Min and Max = -1 that is, any value

Set Output To
Channel = whatever Note channel you need
Event Type = Note On
Note# Max = Min = D#2 there is some dispute about the octave but it should be 27 or 39
Velocity Max = Min = -1 so the velocity is taken from the CC Value

Insert a new line for each button, changing the CC number (Ctrl#) and the note number.

Save - my filename is 'APC_CCtoNote.mox'

Bring up the Midi Port Routing in MidiOx
Drag a connection from the APC Midi in port to MidiYoke1 Out
Click on the small square in the middle of the connect line
Select your newly created map file APC_CCtoNote.mox

Start your music program and select MidiYoke1 as your input as if the APC was plugged into it.

You should be good to go.

All the best
Royce