MIDI-OX User Forum - Print Page


    
      
        MIDI-OX User Forum
        (http://www.midiox.com/cgi-bin/yabb/YaBB.pl)
      

        MIDI-OX >> Mapping Questions >> Mapping to mimic dec/inc PrgChg buttons
        
(Message started by: Nanoboss on Jan 19^th, 2016, 11:09pm)

Title: Mapping to mimic dec/inc PrgChg buttons
Post by Nanoboss on Jan 19^th, 2016, 11:09pm

My first post!!

I am fascinated with MIDI-OX, congratulations on an amazing tool, no regret for donation!
I'm using a nanoKONTROL to control, among other things, a GP-10 Boss guitar processor, both connected to the PC via USB and recognized by MIDI-OX. I successfully create a map for converting the successive 127 "CC" in program 99 changes nanoKONTROL rotary potentiometer it work impressive! it let me jump from one program to another in a second end with a simple pot turn!

But now I need how to make two maps to mimic both forward and reverse patch changer buttons of the GP-10, in order to transmit to device inc/dec (-/+) program changes , up or down, using two Nanokontrol pushbuttons (or two pedals) which can send a single one 0/127 CC values at once or single depending if it is set to momentary of latched mode.

My mapping for my continuous PC I made is like this:

Ch Message V1Min V1Max V2Min V2Max | Channel . . .Event Type V1Min V1Max V2Min V2Max
Any....Ctrl.....*(n).....*(n).... -1 .....-1 | match input PrgChg .......... 0 .... 99 . not used

Delay ms:0
Use input value 2 (pull):yes
Use input value 1 (pull):no

How should be a map for this purpose?
What modifications I have to do?

Thankful in advance by help.