MIDI-OX User Forum - Print Page


    
      
        MIDI-OX User Forum
        (http://www.midiox.com/cgi-bin/yabb/YaBB.pl)
      

        MIDI-OX >> Mapping Questions >> Mapping: Midi Velocity Filter
        
(Message started by: visual_vin on Mar 8^th, 2016, 6:55pm)

Title: Mapping: Midi Velocity Filter
Post by visual_vin on Mar 8^th, 2016, 6:55pm

I wanted to set up a Midi Velocity Filter, to get rid of notes with a velocity less than 120. So only notes between 121 and 127 velocity will be passed to Loopbe1 > Resolume.

Here is the setup I currently have in Options>Data Mapping (link below)

http://imgur.com/9Oz29fb

and unfortunately as you can see via the input/output windows, an input midi note with a velocity of 53 (data2) is still being output to Loopbe1. I am assuming if I was doing this correctly, the output window in MIDI-OX would be blank. Is that correct?

Any guidance would be appreciated.

I used this as a template
http://www.midiox.com/cgi-bin/yabb/YaBB.pl?board=query;action=display;num=1399493294

Title: Re: Mapping: Midi Velocity Filter
Post by Sonus on Mar 9^th, 2016, 10:51am

Hi, discard note on with velocity 1~119 will pass note on with velocity 0, 120~127.

http://i.pi.gy/rPaw.png