MIDI-OX User Forum - Print Page


    
      
        MIDI-OX User Forum
        (http://www.midiox.com/cgi-bin/yabb/YaBB.pl)
      

        MIDI Yoke >> MIDI Yoke 98 >> Runstatus
        
(Message started by: Oldtimer on Nov 16^th, 2008, 11:12am)

Title: Runstatus
Post by Oldtimer on Nov 16^th, 2008, 11:12am

I had Midi-ox/midi-yoke running ok but after a while got midi feedback message (caused by hardware Loopback not software). I went through de-coupling routine and rebooted etc. Now I cant get it to run. The only thing I can see that looks wrong is the running status message:-

Out to MIDI Yoke: 1: RunStatus: OFF: Status: B0

How do I turn it back on?

Title: Re: Runstatus
Post by Jamie OConnell on Nov 17^th, 2008, 2:33pm

That message is not a problem -- you definitely don't want running status on inside Windows (it doesn't really support it). If you got a feedback message, it was presented by MIDI Yoke. So even if a hardware loopback was involved, data was running through MIDI Yoke and you need to close and reopen the MIDI Yoke ports to re-establish the connection. You can do this inside all applications using MIDI Yoke, or by closing and reopening all applications using MIDI Yoke, or by rebooting.

After restarting MIDI-OX look at the Port Routing View: View | Port Routings.... Make sure that there is a line connecting your Inputs to your Outputs. Drag one from the input to the output if necessary.