MIDI-OX User Forum (http://www.midiox.com/cgi-bin/yabb/YaBB.pl)
MIDI-OX >> Questions and Discussion >> exporting sysex to pro53
(Message started by: steve67535 on Jun 17th, 2004, 1:42am)

Title: exporting sysex to pro53
Post by steve67535 on Jun 17th, 2004, 1:42am
Hi..I am trying to use some old sysex files i found from the original prophet 5 into pro53 softsynth....I know midi ox can be used to do this but cannot figure out how to do it...i have read the help files et..but its all greek to me...can anyone help me out...explain it in language i can understand....

thanks...

steve

Title: Re: exporting sysex to pro53
Post by Jamie OConnell on Jun 19th, 2004, 5:38pm
Is the NI Pro53 supposedly compatible with the original Prophet System Exclusive codes!?  That would be an eye opener, if true.

Anyway, to make this work, you'll probably have to be running the Pro53 stand-alone.  In the Pro53 open a hardware MIDI device for input.   Run a MIDI cable from the hardware MIDI Out port to the hardware MIDI In port, making a 'loopback'.  In MIDI-OX, open the Hardware Output port as Output.  Open View | SysEx..., load the .SYX file and send it.

Title: Re: exporting sysex to pro53
Post by steve67535 on Jun 19th, 2004, 10:59pm
Thanks alot Jamie.....yup you are supposed to be able to do it.....I thought it would be kind of fun to try it....see what all the orginal sounds are etc


Steve



MIDI-OX User Forum » Powered by YaBB 1 Gold - SP 1.3.1!
YaBB © 2000-2003. All Rights Reserved.