|
||
Title: Midi ox lagging? do i need to filter something? Post by laserbeak43 on Sep 22nd, 2005, 11:48am hi i have a problem with midi ox im using note on messages to be translated to ccs to send to my sequencer. it works fine but after i send alot of messages it starts to lagg. i need to send alot of messages in my performances. have included the midi output monitor log to show you you can look at it here (http://s45.yousendit.com/d.aspx?id=3489K1ICQ91LF24GGXQW8HDYKD) can i filter these messages out? i also have some note on messges that send bank select program change messages too so im a bit afraid of using the main filter. and the port router filters dont seem as complex. any suggestions? -edit- i dont have anywebspace atm so i had to use yousendit. |
||
Title: Re: Midi ox lagging? do i need to filter something Post by Jamie OConnell on Sep 24th, 2005, 3:46pm I took a quick look at your LOG. As it progresses, there are more and more notes being generated on the same tick (or near to the same tick). I suspect you have some type of MIDI loop in your routing, and I recommend that you review your routing to look for paths where notes output from MIDI-OX are being routed back to the input. Things that can cause this include attaching a MIDI cable from a MIDI Thru (instead of MIDI Out) to a hardware MIDI In, and routing a MIDI Yoke Output port back to an input. |
||
MIDI-OX User Forum » Powered by YaBB 1 Gold - SP 1.3.1! YaBB © 2000-2003. All Rights Reserved. |