MIDI-OX User Forum - Print Page


    
      
        MIDI-OX User Forum
        (http://www.midiox.com/cgi-bin/yabb/YaBB.pl)
      

        MIDI-OX >> Questions and Discussion >> Casio VZ10m and MIDI Ox don't like to play?
        
(Message started by: DevonB on Aug 17^th, 2008, 3:43pm)

Title: Casio VZ10m and MIDI Ox don't like to play?
Post by DevonB on Aug 17^th, 2008, 3:43pm

I've been trying off and on for several weeks to load and save Sysex banks into my Casio VZ10m with MIDI OX with no success. When I try to load in a new bank I get "Load Error, Check System" and when I try to save out to MIDI Ox from the Casio I get "MIDI Error Buffer Full". Finally out of frustration, I tried using Brome's SendSX, and it works perfectly! This validates my MIDI interface, PC, cables and the Casio work fine. It's some setting within MIDI Ox.

I have tweaked the Buffer Send from 60 to 300 ms as well as the Delay after F7 from 60 to 300ms. I have no idea what else to tweak? SendSX works even down to 10ms delays without a problem. What other delay times can I tweak? I've read several posts from 2005 timeframe in a Yahoo Group for the VZ that they 'got it to work by tweaking buffers' but they don't remember what they set it to, and there never is an 'answer' to the problem on any of the posts.

Suggestions? While I can just as easily use SendSX, I'd rather just use MIDI Ox isntead for everything. I can send and receive to other hardware synthesizers without a glitch, so I know I have MIDI Ox working no problem, except with the Casio VZ10m.

Devon

Title: Re: Casio VZ10m and MIDI Ox don't like to play?
Post by Peter L Jones on Aug 18^th, 2008, 12:34pm

Check this thread?
http://www.midiox.com/cgi-bin/yabb/YaBB.pl?board=query;action=display;num=1218477070