MIDI-OX User Forum - Print Page


    
      
        MIDI-OX User Forum
        (http://www.midiox.com/cgi-bin/yabb/YaBB.pl)
      

        MIDI-OX >> Questions and Discussion >> POD XT as MIDI controller thru MIDI OX
        
(Message started by: infernalmachine on Apr 27^th, 2012, 7:18am)

Title: POD XT as MIDI controller thru MIDI OX
Post by infernalmachine on Apr 27^th, 2012, 7:18am

Hi, I have a question regarding setting up my line6 pod xt guitar effects pedal as a midi pedal. Its normal signals are not recognized by DAWs (at least not by Ableton live 8 ), so I have the podxt running through an m-audio midisport 1x1 midi box to my usb port. In midiox I have my input set to 'USB MS1x1 MIDI Interface' and my output set to "Out to MIDI Yoke:6"

This works fine, and I can get MIDI signals to control things in Live (even control things like keystrokes by running through Bome's MIDI translator classic instead of midiox!!). However there are a limited number of CC values that the podxt seems to be outputting. By moving various knobs and mashing the buttons I can get the following:

CC 1/111
1/25
1/50
1/28
1/7 (on like half the controls...)
1/105
1/64
1/1
1/26
1/22
1/63

While this is cool, I'd really like to be able to bank through multiple CC values, or even be able to bank through Bomes MIDI translator presets without a bunch of mouse-clicks and rerouting and all that. The 'Bank' up and down buttons on the podxt don't seem to do anything and I can't get them to send a signal :\

Any suggestions?

I've searched the forums for info on translation, and I didn't find much helpful on the in-program help contents...

Thanks for any advice or direction!

-David

Title: Re: POD XT as MIDI controller thru MIDI OX
Post by infernalmachine on Apr 27^th, 2012, 8:08am

Lol I just had the idea to use the pod to toggle presents in Bomes. Is this possible? ::)

Title: Re: POD XT as MIDI controller thru MIDI OX
Post by infernalmachine on Apr 27^th, 2012, 8:36am

Ok apparently you CAN switch presets with Bomes by setting the output correctly!

So I guess my question still stands of can I change the CC notes on the pod to encapsulate more values than just the ones listed? And can I used the bank keys!!!