MIDI-OX User Forum - Print Page


    
      
        MIDI-OX User Forum
        (http://www.midiox.com/cgi-bin/yabb/YaBB.pl)
      

        MIDI-OX >> Questions and Discussion >> Midi-ox
        
(Message started by: Pissadou on Feb 28^th, 2023, 7:29am)

Title: Midi-ox
Post by Pissadou on Feb 28^th, 2023, 7:29am

I use Vanbasco to play midi sequences.
Vanbasco is configured as an output port on my UA-25 interface.
Why do I see no activity of the notes sent to my synth
(this one reproduces the sequence well) on the output screen
of Midi-ox ?

Title: Re: Midi-ox
Post by Breath on Feb 28^th, 2023, 5:48pm

Vanbasco is an application that outputs Midi and MidiOx reads what MIDI is coming in to the PC.

So to see what Vanbasco is doing either...

Connect with a cable the Midi Out Port connected to Vanbasco on your Midi interface (the cable you sound module is normally connected to) to a Midi In on a Midi interface that is displayed in MidiOx (to set this up goto Options / Midi Devices)
Playing Vanbasco, you should see the Midi data displayed in the Midi Input window in MidiOx.

or

Install Midi Yoke or loopMidi (free from the web - there are others).
They are Midi drivers but don't connect to external hardware.
You can think of them as software Midi Cables

So if you install loopMidi...
1) On Vanbasco make the Midi output port loopMidi
2) In MidiOx go to Options / Midi Devices and select loopMidi input and loopMidi Output (both ends of the software cable)
3) Play Vanbasco and you should see data coming in to the Midi Input window from the loopMidi port.

Vanbasco (in PC) ->loopMidi -----> MidiOx

To play a synth and watch the data....
Goto the MIDI Port Routing window in MiidiOx and drag the loopMidi Input (left side) to the Midi Out connected to your sound module (on the right side)

Vanbasco (in PC) ->loopMidi ----> MidiOx ---> Synth

Hope this helps.
Post again if you have any more questions

All the best
Royce