Author |
Topic: Help with win 7 install (Read 3489 times) |
|
stevehdj
Member
MIDI-OX Rules!
Gender: 
Posts: 11
|
 |
Help with win 7 install
« on: Jan 12th, 2015, 12:11pm » |
 Quote  Modify
|
Hi, I have recently installed Win 7 32 bit on a machine that had been running Midiox on Win xp with no problems but now I cannot get midiox events to pass through the following midi port configuration.
Under midi devices panel-
Midi input - Cakewalk USB interface in
Midi output - Cakewalk USB interface out
Port mapping - Cakewalk USB out with midi icon showing green but the midiox event port below it is dark.
This is same arrangement that I had on Win xp Also have checked the port routing under route 66 icon, Cakewalk in and out is connected and the midiox event port shows connected to the Cakewalk output port.
Not having any problem passing midi in to midi out signals on the cakewalk USB interface. Any help is appreciated
Stevehdj
|
|
 IP Logged |
|
|
|
Breath
Administrator
Gender:
Posts: 1023
|
|
Re: Help with win 7 install
« Reply #1 on: Jan 14th, 2015, 1:12am » |
Quote Modify
|
Hi Steve,
I have never seen MidiOx Event Port 'Dark'.
Even with no devices installed the Event Port look the same DIN socket.
I'm not sure what you mean.
What is not working?
Can you connect the Event Port to your USB interface?
If you can...
View /Control Panel
Press the SEND button.
Can you see data in the Monitor - Output?
All the best
Royce
|
|
IP Logged |
|
|
|
stevehdj
Member
MIDI-OX Rules!
Gender:
Posts: 11
|
|
Re: Help with win 7 install
« Reply #2 on: Jan 14th, 2015, 7:08am » |
Quote Modify
|
Hi Royce
Thanks for the reply
Since posting message I have been able to get midiox events to pass to the cakewalk output however they are not consistent with the mapping that I have created. Also when I look at the midi activity monitor I can see activity on the channels for both Cakewalk in and out ports but the midiox event port does not respond which seems very strange. The mapping translates note on from my organ pedal board (Ch 3) to program change going to Roland BK7M (CH 10) to control style variations. On the bottom right of midiox screen on the info bar I have the REC, SYS and MAP buttons set to on, not sure if this is correct or perhaps causing problem. Wondering too could this be an issue with driver for either USB interface or Midiox. I do not have any other inputs on and no other programs or DAW open. Seems very strange as this is exact same setup that worked fine when on XP. Note at home now but I will try your suggestion on send button tonite. I can advise that I do have midiox on my PC at work and with just using PC keyboard I am able to generate a midiox event seen in the monitor . Thanks again
|
|
IP Logged |
|
|
|
stevehdj
Member
MIDI-OX Rules!
Gender:
Posts: 11
|
|
Re: Help with win 7 install
« Reply #3 on: Jan 15th, 2015, 7:48am » |
Quote Modify
|
Hi Royce
After a long tedious night I now have the mapping working as expected, I found that by setting pedal velocity between 20-120 stopped any problems with inconsistent transmission to output port. I expect there may have been some pedal bounce being picked up when having velocity set for any value. Still one strange item left, when looking at midiox events in the channel activity screen the it still does not show the midiox channel activating on key (pedal) stroke. Tried with many settings and different input channels but no response. Also Icon still not lit up in the port setting view. Strange but al least I am good to go thanks for your help.
Stevehdj
|
|
IP Logged |
|
|
|
Breath
Administrator
Gender:
Posts: 1023
|
|
Re: Help with win 7 install
« Reply #4 on: Jan 16th, 2015, 7:50pm » |
Quote Modify
|
Glad to hear that you are up and going.
All the best
Royce
|
| « Last Edit: Jan 16th, 2015, 8:29pm by Breath » |
IP Logged |
|
|
|
|
User Forum ::
Powered by YaBB
Home 
Help 
Search 
Members 
Login 
Register
Reply
Notify of replies
Send Topic
Print