MIDI-OX User Forum - Print Page


    
      
        MIDI-OX User Forum
        (http://www.midiox.com/cgi-bin/yabb/YaBB.pl)
      

        General >> General Board >> Midi-Ox and BCF2000
        
(Message started by: Rutah on Mar 7^th, 2007, 3:38pm)

Title: Midi-Ox and BCF2000
Post by Rutah on Mar 7^th, 2007, 3:38pm

I am trying to update my firmware for the BCF2000. I used the Behringer update utility tool and got the error-

Welcome to the BC-Update Utility
Please select a file to upload.
BCF2000 update file selected.
Checking midi ports...
No Suitable Device found!
Please choose another file using the Open button or
connect an appropriate device and press the RESCAN button.

I have tried both USB connection and MIDI connection thru my tascam US-122.

They refered me to midi-ox. I am not sure how to make this program work.

Please help!

Thanks

Title: Re: Midi-Ox and BCF2000
Post by Jamie OConnell on Apr 14^th, 2007, 1:20am

Install MIDI-OX: It can show you whether or not your MIDI devices can be seen by other Multimedia programs. Launch MIDI-OX and open Options | MIDI Devices... You MIDI devices will be listed. If they are not, you have a MIDI driver problem with the US-122 that you need to resolve with Tascam first.

Title: Re: Midi-Ox and BCF2000
Post by monkeyboi on Mar 13^th, 2010, 7:03am

The Behringer software is crap. I had to send the firmware update through MIDI-OX to my BCR2000. It worked like a charm on the first try. You need to connect the MIDI-OX Event Port to the hardware port that your BCR is on by drawing a line between them in the MIDI Port Routing window, then send the sysex file over that connection.